Owner's Manual

record to the slave and instead wish to record to the slave at a later time in the song�

When using this method, you must arm the slave to record before the master device

reaches its loop start point� It’s at this loop start point that the master will send the

record command to the slave device(s), so the slave device must be armed in advance

to receive the record command�

• Sequential Slave Recording Method

Using this method, you can record to a JamSync slave immediately upon setting the

loop end point of the master� Use this method when you want to immediately begin

recording to the slave device after recording to the master device�

To record using the Manual Slave Recording Method:

1� Press the

FOOTSWITCH on the master device and begin playing� The REC LED will light

solid red and recording will begin�

2� When nished recording to the master, press the

FOOTSWITCH once to set the loop

end point� The phrase will automatically begin playing back in a repeating loop and the

PLAY LED will light solid green�

3� Press the

FOOTSWITCH on the slave device to arm the slave for recording� Recording

will begin once the master makes another pass of its loop start point (the

REC LED will

light solid red on the slave device when recording begins )� Once recording has begun,

play your part�

4� When nished recording to the slave, press the slave’s

FOOTSWITCH once to set the

loop end point� The phrase will automatically begin playing back along with the master

loop and the

PLAY LED will light solid green�

5� Press the

FOOTSWITCH on the master device 2 times quickly to stop loop playback on

both devices�

To record using the Sequential Slave Recording Method:

1� Press the

FOOTSWITCH on the slave device� The REC LED will ash red, indicating the

slave is armed for recording�

2� Press the

FOOTSWITCH on the master device and begin playing� The REC LED will light

solid red and recording on the master will begin�

3� When nished recording to the master, press the master

FOOTSWITCH once to set

the loop end point� The master device’s recorded phrase will begin playing back and the

armed slave device will immediately begin recording, indicated by the slave’s

REC LED

lighting solid red�