Owner`s manual

36
Stop Modes
1
3
2
4
99
Loop Phrases can be stopped in three ways after the TEMPO/STOP footswitch
is pressed:
• STOP: Stops the phrase immediately when Stop is pressed.
• FINISH: Finishes playing to the end of the phrase and stops after Stop is pressed.
• FADE: Fades the phrase volume to 0 and then stops after Stop is pressed.
To change Stop Modes, follow these steps:
1. Press the SHIFT button. It will now be lit.
2. Press the STOP MODE button to select the LED which is labeled with
the Stop Mode you want to use.. The three Stop Modes are labeled
to the right of the RECORD MODE LEDs.
3. Press the EXIT button.
4. Press the STORE button twice to store the changes, if desired.
NOTE: Stop modes must be stored with each phrase individually.