Owner`s manual

Before you begin recording a phrase, you may want to set a tempo at which

you want to record the loop at. Setting the tempo in an empty loop memory

location automatically starts playing the rhythm guide track (Rhythm Level

must be turned up to hear the guide track). You can use the rhythm guide

track as a metronome for recording against to help keep a consistent tempo

of your performance. To set the tempo for recording, follow these steps:

1. Use the SELECT knob to select a new memory location. (The LOOP

LED and SINGLE LED will be off.)

2. Tap the TEMPO/STOP footswitch at least 2 times (4 or more times is

recommended). The TEMPO/STOP footswitch LED will begin ﬂashing

at the tempo that has been tapped in. The ﬁrst downbeat of the

measure ﬂashes red and the other beats ﬂash green.

3. Turn up the RHYTHM LEVEL knob (if it hasn’t been already) to hear the

rhythm guide track.

4. To begin recording, press the REC/PLAY/OVERDUB footswitch and begin

playing.

If you want to set up a memory location with a tempo but not record to it,

you can just follow steps 1 and 2, but you must then store the new tempo

using the Store procedure. When you return to the empty loop location, the

tempo will already be set as indicated by the TEMPO/STOP footswitch LED

ﬂashing.

Setting a Loop Tempo for Recording