Owner`s manual

The JamMan

Stereo has 99 memory locations and at some time you may need

to delete the contents of a memory location so it may be reused or to free up

memory. To delete a loop from a memory location, follow these steps:

1. Press the SHIFT button. It will now be lit.

2. Press the DELETE button. The DISPLAY shows EL (Erase Loop). The

button will begin ﬂashing waiting for a delete conﬁrmation.

NOTE: If the DISPLAY shows Ei or EC, you have held the DELETE

button too long and need to abort this procedure and start over.

Press the EXIT button at this point to abort the Delete procedure.

3. Press the DELETE button again. The DISPLAY reads E? (Erase Loop?).

The button will continue to ﬂash. To abort this procedure at any

time, press the EXIT button at any time.

4. If you want to delete the contents from this memory location

and return it to its default state, press and hold DELETE button for

two seconds. The DISPLAY will brieﬂy read dE. When the delete

procedure is complete the display will return to the memory number

and the EXIT and DELETE buttons will turn off.

Warning: Deleting a memory location is irreversible and will

erase any recorded information that resides here. Use the Delete

function with caution.

Deleting Individual Loop Phrases