Owner`s manual

58
Factory Restore
This procedure will return the JamMan
®
Stereo to its original factory
settings. All internal loop memories will be reformatted and the original
10 loops that shipped with the JamMan Stereo will be restored. Factory
Restore does not affect any loops on the optional external SD memory card.
WARNING: The Factory Restore procedure will erase all loops
from the JamMan Stereo internal memory and restore it to
its factory state. This procedure is permanent and cannot be
reversed. Use the Factory Restore procedure with caution. It is
recommended you back up your internal loops to your computer
with the JamManager
TM
software and USB connection.
1. Press and hold the STORE button while powering up the JamMan
Stereo.
2. When the display shows Fr, release the STORE button which will now
be flashing.
3. Press the STORE button again. This display will now show r? asking
if you are sure you want to restore the internal memory to its factory
state. To abort this procedure at this time, press the EXIT button.
4. To confirm the restore procedure, press and hold the STORE button
until bu appears in the Display. The JamMan Stereo will return to normal
operation shortly as indicated by loop memory 1 being shown in the
Display.