Owner`s manual

1. Get Connected

Before powering up your JamMan

Stereo:

a. Make Connections

1. Connect a guitar or bass to the LEFT (Mono) IN jack on the JamMan

Stereo’s rear panel.

2. Connect the JamMan Stereo’s LEFT (Mono) OUT to the input of an

ampliﬁer or a channel of a mixer.

b. Connect the Power Supply

1. Start with your ampliﬁer and the JamMan turned off or the mixer

faders at their minimum position.

2. Turn the LOOP LEVEL, RHYTHM LEVEL, MIC LEVEL, and INST LEVEL knobs all

the way down on the JamMan Stereo.

3. Connect the power supply to the POWER jack on the JamMan Stereo.

4. Connect the other end of the power supply to an AC outlet.

5. Turn your ampliﬁer on and turn up its volume to a normal playing

level or bring up the mixer’s faders to a nominal level.

Quick Start