User Guide

Procedures
DigiTech S-DISC™ SysEx
RECEIVE HOLD KEY SCAN CODE (55h)
SYS_HEAD, 55(h), cc, xx, F7(h)
cc Code for the Key Scan.
xx Time the key is pressed expressed in 0.1 second increments.
The Receive Hold Key Scan Code procedure is used to emulate a button press and hold
on the front panel of a DigiTech Device. The device will respond with a Receive Key
Accepted procedure. See the Key Scan Co
de Maps (page 18) for a list of Key Scan
codes.
RESPOND KEY ACCEPTED (56h)
SYS_HEAD, 56(h)
, cc, F7(h)
cc Code echoed for the Key Scan received. (00(h) if key is invalid)
The Respond Key Accepted procedure is sent from the DigiTech device in response and
acceptance of a Receive Scan Code Key or Receive Hold Scan Code Key procedure
but is ignored if received by a DigiTech device.
14
14
Procedures
DigiTech S-DISC™ SysEx