User Guide

RESPOND ERROR/STATUS FLAG (61h)
SYS_HEAD, 61(h), ss
1
, ss
2
, ee
1
, ee
2
, ff
1
, ff
2
, mm
1
, m
2
, mm
3
, mm
4
, F7(h)
ss
1
0000000v(b) where v is bit 7 of the System error ID (B1)
ss
2
0vvvvvvv(b) where v is bits 6 through 0 of the System error ID (B1)
ee
1
0000000v(b) where v is bit 7 of the error message (B2)
ee
2
0vvvvvvv(b) where v is bits 6 through 0 of the error message (B2)
ff
1
0000000v(b) where v is bit 7 of the memory error flag (internal use)
ff
2
0vvvvvvv(b) where v is bits 6 through 0 of the memory error flag (internal use)
mm
1
0000000v(b) where v is bit 15 of the MIDI error flag (internal use)
mm
2
0vvvvvvv(b) where v is bits 14 through 8 of the MIDI error flag (internal use)
mm
1
0000000v(b) where v is bit 7 of the MIDI error flag (internal use)
mm
2
0vvvvvvv(b) where v is bits 6 through 0 of the MIDI error flag (internal use)
Messages:
B1 = 0 - SysEx requested Error/Status (no error)
B1 = 1 - In Algorithm Edit functions:
B2 = 1 - 1 second message is being displayed, the user may abort the message
B2 = 2 - Last selected FX Module would not fit
B2 = 3 - Waiting for key release
B2 = 4 - .5 second message, may be aborted
B2 = 5 - Waiting for key press
B1 = 2 - In Algorithm Link functions
B2 = 1 - On display: “Perform AutoLink? Yes No”
B2 = 2 - On display: “Break all links before AutoLink?”
B1 = 3 - Algorithm Store functions
B2 = 1 - On display: “Alg has been changed do you want to Link? Yes No”
B2 = 2 - On display: “Alg name is already in use.” Note that this display is a 1
second message but if it is aborted then the key is not aborted, also the
Algorithm naming menu is entered
B2 = 3 - On display: “Replace User Alg Yes No Cancel”
B2 = 4 - The store failed, a soft reset is needed
B2 = 5 - Waiting for a key press to abort an error message
B2 = 6 - Changed algorithm name, returning to editing the Algorithm
B2 = 7 - Algorithm has been saved successfully and the current program is being
re-loaded
DigiTech S-DISC™ SysEx
Procedures
17
17
Procedures
DigiTech S-DISC™ SysEx