User Guide

Procedures
DigiTech S-DISC™ SysEx
B1 = 4 - Alg store failed and unit is returning to the editing functions due to an error
B2 = 1 - No room for algorithm
B2 = 2 - FX Module will not fit into the Algorithm
B2 = 3 - Out of CPU or RAM blocks for S-DISC #1
B2 = 4 - Out of CPU or RAM blocks for S-DISC #2
B2 = 5 - Too many parameters for a single Algorithm
B2 = 6 - Out of Algorithm memory
B1 = 5 - Sending/Receiving a single Program Dump
B2 = 1 - Program is too large to send
B2 = 2 - Received Program failed, bad data
B2 = 3 - Receiving Program, waiting for Algorithm
B2 = 4 - Received Program failed, out of Algorithm memory
B2 = 5 - Received Algorithm failed, out of Algorithm slots
B2 = 6 - Received Algorithm failed, out of Program memory
B2 = 7 - Received Algorithm failed, waiting for unit to be powered off and then
back on
B1 = 6- Receiving a System Dump
B2 = 1 - Wrong Version, ignoring data
B2 = 2 - Bad data, resetting unit
B1 = 7 - Receiving a single Algorithm
B2 = 1 - New Algorithm minus 1
B1 = 8 - Other Status
B2 = 1 - Requested Algorithm doesn’t exist
The Respond Error/Status Flag procedure is sent upon detection of a device’s error
status or as a response to a Request Error/Status Flag.
18
18
Procedures
DigiTech S-DISC™ SysEx