User Guide

General SysEx Format
DigiTech S-DISC™ SysEx
The general format for the System Exclusive information is as follows (note: all SysEx values are
displayed in Hex format along with this symbol
(h) for clarification):
Hex Value Definition
F0(h) System Exclusive ‘Begin Message’ byte
00(h)
00(h) Manufacturer’s ID Number (DOD/DigiTech)
10(h)
0n(h) n = channel number minus one
e.g. 00(h) is channel 1
01
(h) is channel 2
etc...
0F(h)
is channel 16
nn nn = device ID number 40(h) identifies the TSR-24 (Extended SysEx)
41
(h) identifies the GSP-2101 (Extended SysEx)
42(h)
identifies the TSR-12 (Basic SysEx)
43
(h) identifies the RP-10 (Basic SysEx)
44
(h) identifies the Legend II (Basic SysEx)
45(h) identifies the Valve FX (Extended SysEx)
pp pp = Procedure number. The different procedure’s names and general formats
are described in the Procedures
Section (page 5).
dd
dd
. .
. . dd = Data as needed by procedures.
. .
dd
dd
F7
(h) System Exclusive ‘End Message’ byte
4
4
General SysEx Format
DigiTech S-DISC™ SysEx
}
}