User Manual

USB Retro Arcade
Game Controller
User Manual
XC-5802
Specifications:
Compatibility: PC Arcade, Raspberry Pi, Nintendo Switch,
PS3 Arcade & Android TV Arcade
Connector: USB 2.0
Power: 5VDC, 500mA
Cable Length: 3.0m
Dimensions: 200(W) x 145(D) x 130(H)mm
Safety:
1. Do not pull apart the casing of game controller to avoid damage and injury.
2. Keep the game controller from high temperatures as it may cause damage to
the unit.
3. Do not expose the game controller to water, moisture or liquids.
Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Road, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int'l: [phone]
Fax: [phone]
www.techbrands.com
Product Diagram:
Joystick
Operation:
1. Plug the USB Cable in to a PC, Raspberry Pi, Nintendo Switch, PS3 or Android TV’s
USB port.
Note: This unit may only be compatible for certain arcade games because
the games have different button configuration.
2. The LED indicator will light up to indicate that it’s working.
3. If you’re using it on Nintendo Switch arcade games, ensure the “Pro Controller
Wired Communication” has been turned on in the settings.
4. If you’re using this game controller with a PC, you can choose between
D_Input and X_Input modes. Press the - and + button at the same time for up
to 5 seconds to change the mode.
Turbo (TB) Function:
1. Depending on which games are being played; you can press and hold the A
button and then turn the TB (Turbo) button to on.
2. Press and hold the A button and the TB (Turbo) button again to turn the function
off.
3. Pressing all 6 buttons can achieve turbo mode by the manual settings depending
on the game type.
Note: Once the unit restarts; the turbo function will be turned off. You will need
to turn on the turbo function again.