OWNER’S MANUAL
WARRANTY We at DigiTech® are very proud of our products and back-up each one we sell with the following warranty: 1. Please register online at digitech.com within ten days of purchase to validate this warranty. This warranty is valid only in the United States. 2. DigiTech warrants this product, when purchased new from an authorized U.S. DigiTech dealer and used solely within the U.S., to be free from defects in materials and workmanship under normal use and service.
INTRODUCTION Thanks for choosing the DigiTech® Ventura Vibe stereo vibrato/rotary pedal. The Ventura Vibe was designed for the selective guitarist who wants the highest quality vibrato/rotary effects in a compact package.
USER INTERFACE 1 2 10 3 11 4 5 12 6 7 8 13 9 1. Effect Type Selector Switch Selects from the following vibrato/rotary algorithm types: • VINTAGE - The classic sound of a vintage vibrato effect (based on the classic Uni-Vibe®) • MODERN - A modern vibrato effect. • ROTARY - Effect based on the sound of a rotating Leslie® speaker cabinet. 2. DC Power Jack Connect the specified Harman power supply (sold separately) to this jack.
6. Input 1 (Mono) Use this jack when only a single connection is needed. Connect your instrument, the output of a pedal, or an amp effects send to this jack. Signals are heard at both outputs when only this jack is used. 7. Indicator LED This LED lights red to indicate when the effect is turned on. 8. Input 2 Connect a second input to this jack for stereo operation. Inputs 1 and 2 are processed separately through the effect then fed to Outputs 1 and 2, keeping true stereo separation between channels.
MAKING CONNECTIONS/APPLYING POWER To connect the Ventura Vibe pedal to your rig: 1. Turn down the amplifier’s master volume control. 2. Make all audio connections to the Ventura Vibe as shown in ‘Connection Diagrams’ on page 4. 3. Connect the appropriate Harman power supply (not included) to the POWER input connector and connect the other end to an available AC outlet. 4. Strum your guitar and gradually increase your amplifier’s master volume control until the desired level is achieved.
Amplifier Effects Loop Setup Harman Power Supply FX SND FX RTN Amp OUT 1 (MONO) IN 1 (MONO) OUT Other Effects IN Use only unbalanced TS instrument cables for audio connections. Optional NOTE: If the amp effects loop has a mix control, set the mix to 100% full wet.
Cold Cold Shot Shot Floyd Floyd Breath Breath EXAMPLE SETTINGS AAGGEE M MOODDEERRNN RROO TTAARR YY M MOODDEERRNN RROO TTAARR AAGGEE NNTT YY VVI I TT N I N get started.
SSPPEEEEDD Clapton Clapton Badge Badge Lucy Lucy Diamonds Diamonds M MOODDEERRNN RROO TTAARR AAGGEE NNTT YY VVI I M MOODDEERRNN RROO TTAARR AAGGEE NNTT YY VVI I Clapton Clapton Badge Badge Lucy Lucy Diamonds Diamonds M MOODDEERRNN RROO TTAARR AAGGEE NNTT YY VVI I M MOODDEERRNN RROO TTAARR AAGGEE NNTT YY VVI I DDEEPPTTHH SSPPEEEEDD DDEEPPTTHH SSPPEEEEDD M MI IXX TTOONNEE DDEEPPTTHH DDRRI IVVEE SSPPEEEEDD M MI IXX TTOONNEE DDEEPPTTHH DDRRI IVVEE M MI IXX TTOONNEE DDRRI IVVEE M MI IXX TTO
PERFORMANCE ACCESSORIES The performance accessories make integrating the Ventura Vibe pedal into any pedalboard a snap. The following accessories are included: • Hook-and-loop Pedalboard Pad (designed to attach to the surfaces found on most commercial pedalboards) • StompLock™ (keeps your settings where you want them) Hook-and-loop Pedalboard Pad To attach the Pedalboard Pad, do the following: 1. Peel off the existing rubber skid pad from the bottom of the pedal. 2.
StompLock™ The included StompLock lets you lock your settings in place, while the open-top design lets you see your settings. To place the StompLock over the pedal knobs: 1. Set the knobs to your preferred settings. 2. Orient the StompLock so that it lines up with the knobs and gently push it over the top of the knobs. 3. To remove the StompLock, grip it from the sides and gently lift it up and off the knobs.
SPECIFICATIONS Interface Controls: Speed, Depth, Mix, Tone, Drive, Effect Type, Effect On/Off Jacks: Input 1 (Mono), Input 2, Output 1 (Mono), Output 2 Inputs Input Impedance: Effect on: >1 MΩ (stereo), >500 kΩ (mono) Effect off: >1 MΩ (stereo), >500 kΩ (mono) Effect off: True hardwire bypass Outputs Output Impedance: Effect on: 1 kΩ Effect off: 1 kΩ Effect off: True hardwire bypass Physical Dimensions: 4.40” (L) x 2.65” (W) x 2.0” (H) Weight: 1.0 lb.
PHONE: (801) 566-8800 WEB: digitech.com SUPPORT: digitech.com/en-US/support Ventura Vibe Owner's Manual 5064622-A © 2015 Harman. All rights reserved. DigiTech is a registered trademark of Harman.