Deutsch Version 13.11.
Deutsch BITTE LESEN SIE DIE ANLEITUNG SORGFÄLTIG UND FOLGEN SIE DEN ANWEISUNGEN. EINE FEHLERHAFTE BEDIENUNG KANN ZU SCHÄDEN AN DER DIGITTRADE HIGH SECURITY HS128 / HS256 (EXTERNAL ENCRYPTED HDD/ SSD) SOWIE ZU DATENVERLUSTEN FÜHREN. STELLEN SIE SICHER, DASS DIE VERSIEGELUNGEN DES PRODUKTES NICHT BESCHÄDIGT WURDEN (SIEHE SEITE 7).
1. Über die DIGITTRADE High Security HDD/SSD 1.1 Verschlüsselung 1.2 Zugriffskontrolle 1.3 Die Smartcard 1.4 Weitere Features 1.5 Die wichtigsten Eigenschaften im Überblick 1.6 Vorteile der DIGITTRADE High Security HDD/SSD 1.7 Versiegelungen der High Security HDD/SSD 2. Anschlussmöglichkeiten 2.1 Anschluss an den USB 1.1 - Steckplatz 2.2 Anschluss an den USB 2.0 - Steckplatz 2.3 Anschluss an den FireWire - Steckplatz 3. Inbetriebnahme der High Security HDD/SSD 3.1 Einlegen der Smartcard 3.
Deutsch 1. Über die DIGITTRADE High Security HDD/SSD Die externe DIGITTRADE HIGH SECURITY HS128 / HS256 (externe verschlüsselte HDD/SSD) ist aufgrund ihrer Sicherheitsfunktionen eine der sichersten Möglichkeiten Daten mobil zu speichern.
1.3 Die Smartcard Es wird eine Atmel CryptoMemory AT88SC014C Smartcard verwendet. Diese kann kryptografische Schlüssel sicher aufbewahren. Zusätzlich sind zwei verschiedene Arten von Smartcards verfügbar: Einerseits, für höhere Sicherheitsanforderungen, die Smartcard Oberthur Cosmo 64 v5.4, zertifiziert mit FIPS 140-2 Level 3. Andererseits, die für besonders hohe Sicherheitsanforderung entwickelte NXP P5CD081 J3A081 JCOP v2.4.1 R3 (BSI-DSZ-CC-0675-2011) Smartcard.
Deutsch 1.4 Weitere Features Die eingebauten Datenträger im 2,5”-Format machen den mobilen Datentresor klein und handlich. Die optionale Verwendung von SSD-Datenträgern bietet zusätzlichen Schutz vor Stößen und Erschütterungen. Die Datenübertragung und die Stromversorgung erfolgen über USB oder FireWire. Die Hardwareverschlüsselung ermöglicht die Verwendung des Speichermediums unabhängig vom Anwenderbetriebssystem und geschieht transparent.
- Privat- und Geschäftsdaten sind sicher vor dem Zugriff Unbefugter geschützt - einfache und sichere Handhabung durch Hardwareverschlüsselung: Anschließen, Anmelden, Verwenden - alle Daten sind sofort verschlüsselt gespeichert, keine Performanceverluste - Integrationsmöglichkeit in bereits bestehende Smartcard-Infrastrukturen in Unternehmen 1.7 Versiegelungen der HS128 / HS256 Die sicherheitsrelevanten Komponenten der HS128 / HS256 sind mit Epoxidharz versiegelt.
Deutsch 2. Anschlussmöglichkeiten Die DIGITTRADE HS128 / HS256 kann entweder per USB-Schnittstelle oder über FireWire mit dem Computer verbunden werden.
Verbinden Sie die HS128 / HS256 mit Hilfe des mitgelieferten USB-Y-Kabels mit Ihrem PC, Laptop oder einem anderen kompatiblen Gerät, das USB-Datenträger unterstützt. Achten Sie dabei darauf, dass Sie zuerst die A- und B-Stecker an den PC oder Laptop (siehe Bild) und dann das Mini-USB-Kabel an die HS128 / HS256 anschließen. Deutsch 2.1 Anschluss an den USB 1.1 - Steckplatz A B Das ist wichtig, da bei der Verwendung eines USB 1.
Deutsch 2.3 Anschluss an den FireWire - Steckplatz Für die Verwendung des FireWire-Anschlusses der DIGITTRADE HS128 / HS256 benötigen Sie ein für Ihren Computer passendes, 9-poliges FireWire-Kabel. Dieses verbinden Sie mit dem FireWireAnschluss Ihres PCs oder Laptops. An der DIGITTRADE HS128 / HS256 befinden sich zwei FireWire-Anschlüsse. Diese ermöglichen eine Reihenschaltung mit HS128 / HS256. Schließen Sie dazu die FireWire-Kabel wie in der Abbildung an.
Die notwendige Stromversorgung der HS128 / HS256 erfolgt über USB oder FireWire. Ein zusätzliches Netzteil ist in der Regel nicht erforderlich. Sollte über die von Ihnen verwendeten Anschlusskabel keine ausreichende Stromversorgung gewährleistet werden, kann als optionales Zubehör ein DIGITTRADE Netzteil erworben werden. Nach dem korrekten Anschluss der DIGITTRADE HS128 / HS256 an den Computer leuchten zunächst die Status-LED „ACTIVE”, „STATUS” und „ERROR” kurz hintereinander auf.
Deutsch 3.2 Eingabe der Smartcard-PIN Nach der Inbetriebnahme und der erfolgreichen Erkennung einer gültigen Smartcard ist das Keypad der DIGITTRADE HS128 / HS256 beleuchtet und für die PIN-Eingabe bereit. Jetzt kann die 8-stellige eingegeben werden. PIN Die werkseitig voreingestellte PIN lautet: 1-2-3-4-5-6-7-8 Geben Sie diese über das Tastenfeld ein. Bestätigen „ENTER“.
3.3 Ändern der Smartcard-PIN Um die PIN Ihrer Smartcard zu ändern, gehen Sie wie folgt vor: 1) Stecken Sie die Smartcard Steckplatz (siehe Seite 11). in den dafür vorgesehenen Smartcard- 2) Drücken Sie die Taste „CHANGE PIN“ und anschließend die „1“. 3) Bestätigen Sie die Eingabe mit „ENTER“. Die „STATUS“-LED leuchtet vier Mal auf. 4) Geben Sie die aktuelle 8-stellige PIN ein und bestätigen Sie die Eingabe mit „ENTER“.
4. Geräte-PIN-Funktionen Deutsch Mithilfe der Geräte-PIN können Sie folgende Funktionen durchführen: - Ändern der Geräte-PIN - Aktivieren/Deaktivieren des Lock-Out Modus Die bei der Auslieferung voreingestellte Geräte-PIN lautet: „8-7-6-5-4-3-2-1”. Aus Sicherheitsgründen ist es zwingend erforderlich, diese zu ändern, um Datenverluste durch Handlungen Unbefugter zu vermeiden. 4.
Deutsch 4.2 Aktivieren/Deaktivieren des Lock-Out Modus (Geräte-PIN erforderlich) Im aktivierten Lock-Out Modus wird der Zugriff auf die Daten nach dem Entfernen der Smartcard aus dem Gehäuse sofort unterbrochen. Bei der Auslieferung der HS128 / HS256 ist der Lock-Out Modus aktiviert. Die „STATUS“-LED leuchtet rot im authentifizierten Zustand. Der Nutzer kann in besonderen Fällen diese Funktion deaktivieren.
Deutsch 5. Initialisierung / Partitionierung und Formatierung unter Windows Um die HS128 / HS256 unter Windows zu initialisieren, gehen Sie wie folgt vor: - Gehen Sie in die Datenträgerverwaltung. Klicken Sie dazu mit der rechten Maustaste auf „Arbeitsplatz“ und wählen Sie anschließend „Verwalten“ aus. Unter Windows Vista und 7 wählen Sie „Start“, klicken dann mit der rechten Maustaste auf „Computer“, danach auf „Verwalten“ und anschließend auf die „Datenträgerverwaltung“.
Deutsch - Hier können Sie mit einem Klick auf „OK“ das neue Laufwerk initialisieren. Hinweis: Falls die Initialisierungsaufforderung nicht automatisch erscheint, oder sie mit einem Klick auf „Abbrechen“ beendet wurde, können Sie die Initialisierung auch mit einem Rechtsklick auf dem Datenträgerfeld („Nicht initialisiert“) ausführen.
Deutsch - Tragen Sie die gewünschte Größe der Partition in MB ein und klicken Sie dann auf „Weiter“: - Sie können der Partition einen Laufwerksbuchstaben zuweisen. Klicken Sie anschließend auf „Weiter“: - Wählen Sie nun das gewünschte Dateisystem, die Art der Formatierung und klicken Sie auf „Weiter“: - 18 Die Formatierung wird abgeschlossen. Bestätigen Sie diesen Vorgang, indem Sie auf „Fertig stellen“ klicken.
Deutsch Die Dauer der Formatierung kann je nach Festplattengröße variieren. Wurde die Formatierung abgeschlossen, wird die HS128 / HS256 als „Fehlerfrei“ angezeigt und kann nun verwendet werden: Es besteht zudem die Möglichkeit, über die „Datenträgerverwaltung“, die DIGITTRADE HS128 / HS256 in mehrere Partitionen einzuteilen. Um die HS128 / HS256 zu partitionieren, gehen Sie wie folgt vor: - Wählen Sie mit der Maus die HS128 / HS256 aus und öffnen Sie mit der rechten Maustaste das Kontextmenü.
- Wählen Sie den Punkt „Volumen verkleinern“ aus. Deutsch - Tragen Sie den gewünschten Speicherplatz (in MB) ein, auf den die Partition verkleinert werden soll: - Es wird jetzt ein nicht zugeordneter Bereich im Verwaltungsbildschirm angezeigt: - Markieren Sie den nicht zugeordneten Bereich mit der Maus, öffnen Sie das Kontextmenü mit der rechten Maustaste und wählen Sie den Punkt „neues einfaches Volumen”. - Es öffnet sich der Partitionierungsassistent: - Klicken Sie auf „Weiter”.
- Sie können der Partition einen Laufwerksbuchstaben zuweisen. Klicken Sie anschließend auf „Weiter“: - Wählen Sie das gewünschte Dateisystem, die Art der Formatierung und klicken Sie auf „Weiter“: - Die Partitionierung wird abgeschlossen. Bestätigen Sie diesen Vorgang indem Sie auf „Fertig stellen“ klicken: Hinweis: Der neu partitionierte Bereich wird formatiert. Nach Abschluss der Formatierung wird die neue Partition automatisch vom System erkannt.
Deutsch 6. Initialisierung / Partitionierung und Formatierung unter MAC OS X Zum Verwalten externer Festplatten unter MAC hilft das „Festplatten Dienstprogramm“. Dazu öffnen Sie „Programme“ und anschließend den Punkt „Dienstprogramme“. - Wählen Sie das „Festplatten-Dienstprogramm“ aus. Es öffnet sich das Verwaltungsprogramm zum Initialisieren, Partitionieren und Formatieren von Festplatten. - Wählen Sie aus der Laufwerksübersicht auf der linken Seite die HS128 / HS256 Festplatte aus.
- Bestätigen Sie die Initialisierung / Formatierung durch das Anklicken der Schaltfläche „Löschen“. Das Partitionieren der HS128 / HS256 Festplatte erfolgt ebenfalls über das „Festplatten-Dienstprogramm“. Nach Auswahl der HS128 / HS256 in der Laufwerksübersicht lassen sich im Menüpunkt „Partitionieren“ einzelne eigenständige Partitionen und die jeweilige gewünschte Partitionsgröße einstellen. - In der Mitte sehen Sie die aktuelle Partitionierung der Festplatte.
Deutsch 7. Initialisierung / Partitionierung und Formatierung unter Linux Es besteht die Möglichkeit, die HS128 / HS256 Festplatte unter Linux in mehrere Partitionen einzuteilen. Dabei muss zunächst die HS128 / HS256 für das korrekte Dateisystem initialisiert werden. Die Vorgehensweise wird hier auf der Basis von YaST von Suse Linux beschrieben. Dieser Vorgang ist unter anderen Linux-Distributionen ähnlich. - Öffnen Sie zuerst YaST. Sie werden ggf. dazu aufgefordert, sich zu authentisieren.
- Zum Löschen der standardmäßig vorhandenen NTFS-Partition wählen Sie diese mit dem Cursor aus und klicken anschließend auf „Löschen”. - Sie werden vom System gefragt, ob Sie die Partition wirklich löschen wollen. Vergewissern Sie sich, dass Sie die richtige Partition ausgewählt haben und bestätigen Sie, indem Sie auf „Ja” klicken. Hinweis: Beim Löschen der Partition werden auch alle auf der Partition befindlichen Dateien unwiderruflich gelöscht.
Deutsch - In diesem Fenster legen Sie alle Merkmale für die Partition fest. Sie können zwischen verschiedenen Dateisystemen wählen, die Größe bestimmen und bei Bedarf sogar den Einhängepunkt in Ihr Linux-System festlegen. - Bestätigen Sie abschließend alle Ihre Angaben mit „OK”. - Die Formatierung erfolgt ähnlich. Wählen Sie hierzu die gewünschte Partition aus und klicken Sie auf „Bearbeiten” - Setzen Sie anschließend den Haken bei „Formatieren” und wählen Sie ein passendes Dateisystem aus.
In der nachstehenden Tabelle sehen Sie die Kompatibilität zwischen den Betriebsund Dateisystemen. L - NTFS FAT32 HFS+ EXT3 Windows 98 X L, S X X Windows NT, 2000, ME, XP, Vista, 7 L, S L, S X X Mac OS X L L, S L, S X Linux L L, S X L, S Lesen S - Schreiben X - Keine Kompatibilität Mit Erweiterungsprogrammen können ggf. auch Daten auf Dateisysteme geschrieben werden, bei denen dies sonst nicht möglich ist.
Deutsch 9. Anwendungsmöglichkeiten der HS128 / HS256 1) Sicherer und kosteneffizienter Datentransport Die HS128 / HS256 kann für den Transport vertraulicher Daten verwendet werden. Dazu werden beim Sender und beim Empfänger der Daten Smartcards mit dem gleichen kryptografischen Schlüssel hinterlegt. Der Absender versendet nur die HS128 / HS256. Da der kryptografische Schlüssel physisch nicht vorhanden ist (er befindet sich auf den Smartcards), kann dieser beim Transport nicht ausgelesen werden.
2) Trennung von Datenträger und Authentifizierungen 3) Deutsch Der Zugriff auf die Daten kann so reglementiert sein, dass er nur durch das Zusammenführen von z.B. drei Personen möglich ist. Person X besitzt die HS128 / HS256, Person Y verfügt über die Smartcard und Person Z kennt die SmartcardPIN. Die drei Personen kommen nur zur Datenübernahme an der Empfängerstelle zusammen und trennen sich anschließend wieder.
Deutsch 7) Bootfähigkeit Auf der DIGITTRADE HS128 / HS256 können Betriebssysteme, Programme und Daten gespeichert werden. Diese Anwendung ist sowohl für stationäre als auch mobile Computer geeignet. Mit dem Trennen der HS128 / HS256 vom PC bleiben die Daten, Programme und Betriebssysteme, inkl. temporärer Dateien ausschließlich auf der HS128 / HS256 verschlüsselt gespeichert und sind für Unbefugte unzugänglich.
Bus-Typ: Transferrate: Smartcard: Verschlüsselung: S-ATA 150 USB 1.1 max 12 MBit/s USB 2.0 max 480 MBit/s FireWire 400 max 400 MBit/s FireWire 800 max 800 MBit/s Smartcard Atmel CryptoMemory AT88SC014C 128-Bit AES-ECB / 256-Bit AES-CBC Die Umrechnung von Byte zu KByte, MByte und GByte erfolgt von Computern und Festplattenherstellern unterschiedlich.
Deutsch 11. Fehlersuche Sollte die DIGITTRADE HIGH SECURITY HDD HS128 / HS256 einmal nicht richtig funktionieren, gehen Sie bitte folgende Checkliste durch. Sollten die Probleme weiterhin bestehen, können Sie gern den technischen Support von DIGITTRADE kontaktieren. Problem Merkmale Lösung Das Eingabefeld ist nicht eingeschaltet das Keypad ist nicht beleuchtet Prüfen Sie, ob der USB- / FireWire-Anschluss fest mit dem USB- / FireWireAnschluss Ihres Computers verbunden ist.
Merkmale Lösung Das Laufwerk wird nicht erkannt es wird ein minderwertiges USB-Kabel verwendet Verwenden Sie bitte das im Lieferumfang enthaltene USB-Kabel und verbinden Sie beide USB-Stecker mit Ihrem System. Das Laufwerk arbeitet langsam Anschluss über USB Bitte prüfen Sie, ob die HS128 / HS256 mit einer USB 2.0 Schnittstelle verbunden ist. ein anderes USB-Kabel wird verwendet Verwenden Sie bitte das im Lieferumfang enthaltene USB-Kabel und verbinden Sie beide USB-Stecker mit Ihrem System.
Deutsch 12. Datensicherheit und Haftungsausschluss Wir empfehlen, die auf der DIGITTRADE HIGH SECURITY FESTPLATTE HS128 / HS256 befindlichen Daten regelmäßig auf anderen Speichermedien zusätzlich zu sichern. Dies schützt Sie vor einem vollständigen Datenverlust. Die DIGITTRADE GmbH haftet nicht für den Verlust von Daten sowie dadurch entstehende Kosten und Schäden. 13. Aufbewahrung der Smartcard Zum Lieferumfang der DIGITTRADE HS128 / HS256 gehören jeweils zwei Smartcards.
Deutsch 14. Lieferumfang - DIGITTRADE HIGH SECURITY FESTPLATTE HS128 / HS256 (versiegelt) - 2 Smartcards - USB-Y-Kabel - Bedienungsanleitung - Hardcase 15. Hinweis zum Schutz und Erhalt der Umwelt Gemäß der EG-Richtlinie dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden.
Zerstörendes kryptografischen Schlüssels (Smartcard-PIN unbekannt) Ändern der Geräte-PIN Ändern der Smartcard-PIN Anmeldevorgang der HS128 / HS256 Deutsch 16.
Deutsch Verbinden Sie die HS256S mit Ihrem PC Trennen Sie die HS256S von Ihrem PC Konnektor Einstecken der Smartcard in den Smartcard-Steckplatz SC Die Smartcard ist gesperrt und kann nicht mehr verwendet werden SC-PIN 1-2-3-4-5-6-7-8 SC-PIN NEU 1-2-3-4-5-6-7-8 GERÄTE-PIN 8-7-6-5-4-3-2-1 GERÄTE-PIN NEU 8-7-6-5-4-3-2-1 1-2-3-4-5-6-7-8 Eingabe der Smartcard-PIN auf dem Touchpad Eingabe der neuen Smartcard-PIN auf dem Touchpad Eingabe der Geräte-PIN auf dem Touchpad Eingabe der neuen Geräte-PIN auf d
PLEASE READ THE USER MANUAL CAREFULLY AND FOLLOW THE INSTRUCTIONS. English MISUSE CAN LEAD TO DAMAGE AND\OR DATA LOSS OF THE DIGITTRADE HIGH SECURITY HS128 / HS256 (EXTERNAL ENCRYPTED HDD/ SSD).
1. 1. About the DIGITTRADE HS128 / HS256 1.1 Encryption 1.2 User authentication 1.3 The smart card 1.4 Extra features 1.5 Overview of the most important features 1.6 DIGITTRADE HS128 / HS256 benefits 1.7 The HS128 / HS256 security seals 2. Connectivity 2.1 Connecting to a USB 1.1 Port 2.2 Connecting to a USB 2.0 Port 2.3 Connecting to a FireWire Port 3. Getting started with the HS128 / HS256 3.1 Inserting the smart card 3.2 Entering the smart card PIN 3.3 Changing the smart card PIN 4.
1. About the DIGITTRADE HIGH SECURITY HDD English The external DIGITTRADE HIGH SECURITY HS128 / HS256 (external encrypted HDD/SSD) is one of the safest solutions to save mobile data based on its security features. In regards to the confidentiality of the data the DIGITTRADE HS128 / HS256 is secure from unauthorized access even if it were to be stolen, lost or misplaced and also from digital and physical attacks.
1.3 The smart card Two Smartcard (Smartcard Atmel CryptoMemory AT88SC014C) are used. The card can securely save cryptographic keys. There are two different types of smart cards optionally available. For higher security requirements, the smartcard Oberthur Cosmo 64 v5.4, certified by FIPS 140-2 level 3. On the other hand, for especially high security requirements, two java based smart cards, NXP P5CD081 J3A081 JCOP v2.4.1 R3 (BSI-DSZCC-0675-2011) are available.
1.4 Extra features English The 2.5 inch built-in data storage device makes the HS128 / HS256 small and handy. The optional usage of SSD storage devices makes it shock proof. The data transfer and power solution are solved by USB or FireWire. The hardware encryption method makes it possible to use the storage device on any OS and occurs transparently. Accessing the data occurs without the loss of read/write speed. 1.
1.6 DIGITTRADE HS128 / HS256 benefits - Private and company data are safe from unauthorised access English - Easy and safe handling using Hardware encryption: connect, log in, use it - All data is immediately saved with encryption, no performance loss - Integrating in existing Smartcard-Infrastructures within Companies. 1.7 The HS128 / HS256 security seals The components vital to the security are sealed with epoxy resin. There are also security seals placed on the opening points as seen below.
2. Connectivity The DIGITTRADE HS128 / HS256 can either be connected to a computer using USB or FireWire.
Connect the HS128 / HS256 with the supplied USB-Y-cable to your computer, laptop or any other compatible device, which supports USB storage devices. Paying attention that you connect the A- and B-plug to the PC or laptop first (Picture 1) and then the mini USB plug to the HS128 / HS256. English 2.1 Connecting to a USB 1.1 Port A B This is important, because when using a USB 1.1 port the needed starting current is sometimes not available. 2.2 Connecting to a USB 2.
2.3 Connection to FireWire English To use the FireWire port on your DIGITTRADE HS128 / HS256 you will need a 9 pin FireWire cable for the port on your computer. There are two FireWire ports on the DIGITTRADE HS128 / HS256. This makes a series connection possible with the HS128 / HS256. For this plug your FireWire cable as seen in the image below.
The necessary power supply for the HS128 / HS256 is provided by USB or FireWire. An extra power supply is usually not needed. If the cable you are using does not provide enough power an optional DIGITTRADE power supply can be purchased. After correctly connecting the HS128 / HS256 to the computer the StatusLED will shortly light up „ACTIVE”, „STATUS” and „ERROR” in turn. After which your DIGITTRADE HS128 / HS256 is operational yet it still has to be unlocked. Have your smart card and smart card PIN ready.
3.2 Entering the smart card PIN English After starting up and identifying a valid smart card the display on the DIGITTRADE HS128 / HS256 illuminates and is ready for you to enter the PIN. Now the 8-digit PIN can be entered. The factory set PIN is: 1-2-3-4-5-6-7-8 Enter the PIN using the touch pad Then confirm with „ENTER“. Note: to guarantee the safety of your data it is very important to change the factory set PIN (Page 57). Change the smart card pin periodically.
3.3 Changing the smart card PIN 1) Insert the Smart Card into DIGITTRADE HIGH SECURITY HDD (see page 37). 2) Press the “CHANGE PIN” button and afterwards the “1” button. 3) Confirm the entry with “ENTER”. The “STATUS” LED will flash four times. 4) Enter the current 8-digit PIN and press “ENTER” to confirm the entry. 5) Enter the new 8-digit PIN and press “ENTER” again for confirmation . 6) Enter the new confirmed 8-digit PIN again and press “ENTER”.
4. Device PIN Features With the device PIN you can perform the following things: English - Change the device PIN - Activate/deactivate the Lock-Out Mode The factory set device PIN is: „8-7-6-5-4-3-2-1”. For security reasons it is very important to change the device PIN to prevent data loss by actions from an unauthorised person. 4.1 Changing the device PIN To change the device PIN, follow these steps: 1) Insert the smart card into the card slot.
In the activated Lock-Out Mode access to the data is instantly stopped if the smart card is removed. The HS128 / HS256 is factory set with lock out mode active. The „STATUS“- LED illuminates red during the authentication process. The user can deactivate this feature in particular situations. This must be done when only one smart card has access to many different storage devices that are supposed to be unlocked at the same time but have the same cryptographic key.
5. Initialising / partitioning and formatting with Windows To initialize the HS128 / HS256 with Windows follow these Steps: English - Enter disk management. To do this right-click on my computer and then click on manage. In Windows Vista or 7 click start, then right-click on my computer, choose manage and then click on Disk management from the list.
English - Here you can initialize the drive by clicking „OK“ Note: In case the initialisation window does not automatically pop up , or it was ended by clicking „Cancel“, you can initialise the disk by right clicking on it in the list. - The status should then change from „not initialised“ to „online” - Right click on the „unallocated“ area and in the menu choose „New simple volume“. In the started assistant you can change all needed settings and format the drive.
- Type the desired size of the partition in MB and click „next“: English - You may assign a letter to the partition then click on „next“: - Now choose the file system and the type of format you would like to use and click „next“: - 54 The format will then complete to continue click „done“:
English The duration of the format can vary depending on the size of the hard drive. When formatting is complete the HS128 / HS256 will be shown as „healthy“ and can now be used: It is also possible to partition the DIGITTRADE HS128 / HS256 in more than one partition using the disk management.
- Choose „shrink volume“. - Type the desired size (in MB) the partition should be shrunk to English - It will then show unallocated space in the management window - Scroll to the unallocated space, right-click and then choose „new simple volume” from the menu. - The partition manager opens: - Click „next” to continue.
English - Type the desired size of the partition in MB and click „next“: - You may give the partition a letter then click on „next“: - Now choose the file system and the type of format you would like to use and click „next“: - The format will then complete to continue click „done“: Note: The newly partitioned area is being formatted. After successfully partitioning, the new partition is automatically recognised by the system.
English 6. Initialising / partitioning and formatting with Mac OS X To manage external disks using a MAC you can use the „disk utility“. To open it go to „Programs“ and then „Utilities “. - Choose the „Disk Utility“. The disk management for initialising, partitioning and formatting opens. - From the drive list on the left choose the HS128 / HS256. Under menu item „delete “ you can initialise and partition the HS128 / HS256.
As well as giving the drive a name you can choose the file system to be used. For MAC OS X you should use „Mac OS Extended (Journaled)“ and for the classic MAC OS 9 the HFS Format (Mac OS Extended). English - Confirm the initialisation / format by clicking the „delete“ button. To partition the HS128 / HS256 the „Disk utility“ is also used. To do this simply click on the HS128 / HS256 and choose „partitioning“ you may also choose the size of the partiotions.
7. Initialising / partitioning und formatting with Linux English It is possible to partition the DIGITTRADE HS128 / HS256 in more than one partition using Linux. To do this the correct file system has to be initialised first. The process described here is based on YaST from Suse Linux. The process is similar on other Linux distributions. To begin open YaST, if prompted you may have to type your root password into the password window, then press “Enter.
- Here you can choose the desired storage device and partition it or change/ delete previous partitions. English - To delete the standard already existing NTFS partition select it and then click on „delete“. - You will be asked by the system if you are sure you want to delete the partition. Make sure you selected the right partition and continue by clicking „Yes“. Note: After deleting the partition all data on the partition is irreversibly deleted.
- In this window the settings are chosen. You can choose a file system, the size and even if needed the mount point in your system. - When finished confirm your entries with „OK“. English - Formatting is similar, to do this choose the partition you would like to format and click on „Edit“. - Lastly tick „format“ and choose a file system. Confirm with „OK“. - To apply the settings click „Finish“. - In a new window all changes will be displayed.
8. The Correct File System R - read the compatibility between NTFS FAT32 HFS+ EXT3 Win 98 X R, W X X Win NT, 2000, ME, XP, Vista R, W R, W X X Mac OS X R R, W R, W X Linux R R, W X R, W W - write X - no operating English - The table below shows systems and file systems. compatibility You may be able to write data to file systems that are usually not compatible by using an external program.
9. Possible usage of the DIGITTRADE HS128/HS256 1) Secure and cost-efficient data transport English The HS128 / HS256 can be used to transport confidential data. For this both the dispatcher and recipient of the data have a smart card with an identical cryptographic key. The dispatcher only sends the HS128 / HS256. As the cryptographic key does not physically exist (it is on the smart cards), it cannot be read out during transport.
2) Data storage device & Authentication separation 3) English Access to the data can be regulated so that it is only possible by i.e. combining three people. Person X has the HS128 / HS256, Person Y has the smart card and person Z knows the smart card PIN. The three people only meet for the data transfer at the recipient and separate again afterwards. Persons X,Y and Z cannot gain access to the data on their own.
7) Bootability English Operating systems, programs and data can be saved to the HS128 / HS256. This usage is compatible with stationary as well as mobile computers. By disconnecting the HS128 / HS256 from the pc, the data, programs and operating systems are saved and encrypted exclusively on the HS128 / HS256 and are inaccessible by unauthorized persons.
Interface: Data Transfer Rate: Smart Card: Supported Encryption: S-ATA 150 USB 1.1 max 12 Mbps USB 2.0 max 480 Mbps FireWire 400 max 400 Mbps FireWire 800 max 800 Mbps Smartcard Atmel CryptoMemory AT88SC014C 128-Bit AES-ECB / 256-Bit AES-CBC Computers and HDD manufacturers convert differently from Byte to KByte, MByte and GByte. HDD manufacturers calculate in the metric system (1 KByte = 103 Byte = 1000 Byte) and computers use due to their construction the dual system (1 KByte = 210 Byte = 1024 Byte).
11. Troubleshooting English If any problems occure with your DIGITTRADE HIGH SECURITY HDD please read the following checklist to find a solution. If further technical support is required, please feel free to contact our support team. Problem Symptom Solution The numberpad is inactive keypad light is turned off Ensure that the USB connector is firmly connected to your computer’s USB port. If you are using Firewire, ensure that the Firewire connector is firmly connected to the computer’s Firewire port.
Symptom Solution The drive cannot be identified the wrong USB-cable is used Please use the delivered USB-Y-cable and connect the A- and B-plug to your computer. The drive is performaing very slowly connection using USB Please ensure your HS128 / HS256 is connected to a USB 2.0 bus interface. the wrong USB-cable is used Please use the delivered USB-Y-cable and connect the A- and B-plug to your computer.
12. Data security and disclaimer English We recommend to frequently backup your data saved on the DIGITTRADE HIGH SECURITY HDD on another storage device. This will protect you against a total data loss. The DIGITTRADE GmbH is not liable for data loss and/or resulting costs and damages. 13. Smart card storage The DIGITTRADE HS128 / HS256 is delivered with 2 smart cards. If a smartcard is lost or broken, we recommend using the HS128 / HS256 with two new smart cards with a new cryptographic key.
14. Product contents - DIGITTRADE HIGH SECURITY HDD HS128 / HS256 (sealed) - 2 smart cards English - USB-Y-Cable - Manual - Hard case 15. WEEE Statement According to the EC directive, waste electrical and electronic equipment (WEEE) must not be disposed as municipal wastes. To avoid the spread of the contained fabric components in your environment and to save natural resources we would like to ask you to hand this product after its economic life time only to a collecting point for WEEE in your area.
deleting of the cryptographic key (unkown smart card PIN) changing the device PIN changing the smart card PIN English authentication on the HS128 / HS256 16.
Connect the HS128 / HS256 to the PC disconnect the HS128 / HS256 from the PC Connector English Insert the smart card into the slot SC The smart card is locked and unusable SC-PIN Enter the smart card PIN by using the touchpad 1-2-3-4-5-6-7-8 SC-PIN NEU 1-2-3-4-5-6-7-8 GERÄTE-PIN Enter the new smart card PIN on the touchpad Enter the device PIN on the touchpad 8-7-6-5-4-3-2-1 GERÄTE-PIN NEU Enter the new device PIN on the touchpad 8-7-6-5-4-3-2-1 1-2-3-4-5-6-7-8 Misentry of the smart card PIN
Ihre Notizen / Your Notes 74