Inc Sound Module Decoder - Manual

www.digitrax.com- 15 -

Refer to TABLE II for Digitrax Mobile Decoder Standard for Wire Colors

and Figure 1 Digitrax Decoder Wiring Diagram for general instructions and

the specific Decoder Instruction Sheet that came with your decoder for specific

instructions for the decoder you are installing. See Figure 2 for lamp installa-

tion information.

TABLE II: Digitrax Mobile Decoder Wire Colors

What the wires are for Wire Color

Power Pick-up Right (Engineer’s Side) Red

Power Pick-up Left (Fireman’s Side) Black

Motor + Right Brush Orange

Motor - Left Brush Grey

F0(FWD)-Forward Light White

F0(REV)-Reverse Light Yellow

Lamp Common Blue

F1-Function 1 Green

F2-Function 2 Violet

F3-Function 3 Brown

F4-Function 4 White w/ Yellow Stripe

F5-Function 5 White w/ Green Stripe

F6-Function 6 White w/ Blue Stripe

Figure 1: Digitrax Decoder Wiring Diagram

Figure 1 Notes:

Do not exceed the decoder’s total function output current rating. Blue (+ com-

mon) must be hooked up to enable transponding. If Blue (+ common) is not

used, connect function power to either track power pick up. The directional

light function “Lamp Return Line” can be hooked to Blue (+ common) as

shown or to either track pick-up.