Inc Sound Module Decoder - Manual

© 2017 Digitrax, Inc.
www.digitrax.com- 52 -
8.8 CV09 SuperSonic (Quiet Operation)
SuperSonic motor drive sets up transponding compatible silent operation by
adjusting the motor frequency. In this case, 00 is max (16KHz) and 225 is
minimum. Note: If you are using decoders made by other manufacturers on
a transponding equipped layout, you may need to turn off this feature in those
decoders for transponding to work properly.
9.0 Function CVs
Function CVs control how the function leads on your decoder work.
9.1 Digitrax Light Effects: CV49-CV52 & CV113-CV116
Decoders with FX
3
features have 8 user configurable, independent special
effects generators. These are set up by programming CV values as described
below. If you do not program the FX
3
CVs to set up the features, your func-
tion outputs will run as standard on/off function outputs.
Standard functions turn functions on and off.
FX
3
functions incorporate up to 8 independently controllable FX
3
gener-
ators. FX
3
function outputs can be mapped to be controlled by any
function key on your throttle. A master light switch can be set up to
turn off all lights on a locomotive. Functions associated with loco-
motives in advanced consists can also be controlled independently.
9.2 Setting Up FX
3
Effects On Function Outputs
1. Each function output has an FX
3
control CV associated with it. Using
TABLE X below, determine which CV you need to program to set
up an FX
3
feature for the function output you are working with. For
example, if you want to set up an FX
3
feature on your forward head-
light, you will use CV49 to control the FX
3
feature for the LED/
lamp attached to the F0F decoder output.
TABLE X: FX
3
Generator CVs
FX
3
CV# Function # Output Color
CV49 F0/Light Forward (F0F) White
CV50 F0/Light Reverse (F0R) Yellow
CV51 F1 Function 1 Green
CV52 F2 Function 2 Violet
CV113 F3 Function 3 Brown
CV114 F4 Function 4 White/Yellow
CV115 F5 Function 5 White/Green
CV116 F6 Function 6 White/Blue