Inc Sound Module Decoder - Manual
© 2017 Digitrax, Inc.
www.digitrax.com- 57 -
9.3.7 Rule 17 AND Forward Ditch Lights
To set up a rule 17 dimming & forward ditch lights on F0F, F0R & F2:
1. Wire lamp or LED to F0F and Blue Common
2. Wire lamp or LED to F0R and Blue Common
3. Wire lamp or LED to F1 and Blue Common
4. Wire lamp or LED to F2 and Blue Common
5. Program CVs to the values in the table below.
CVs for Rule 17 dimming and Forward Ditch Lights Example
CV# CV Value Eect
49 104 Rule 17 on head light & no ditch lights in reverse
50 120 Rule 17 on rear light & no ditch lights in reverse
51 106 Right forward ditch light, directional
F0 & F2 must be ON for this to operate
52 107 Le forward ditch light, directional
F0 & F2 must be on for this to operate
62 196 High keep-alive for lamps,
rate 4 gives approx. 1 second FX eect rate
63 064 5 second ditch light hold over
aer F2 is turned OFF
is will cause ditch lights to be ON while moving along the track and ash
when F2 is pressed at the crossing. If you want the ditch lights to be OFF
while moving and come ON & ash when you press F2, program CV51 to 234
and CV52 to 235.
9.3.8 Alternating Double Pulse Strobes on F1 & F2
To set up alternating double pulse strobes:
1. Wire lamp or LED to F1 and Blue Common
2. Wire lamp or LED to F2 and Blue Common
3. Program CV51 to 037
4. Program CV52 to 053
This is an example of using the alternate effects of phases A & B with
two different function outputs wired to two different LED/lamps..