Inc Sound Module Decoder - Manual

www.digitrax.com- 8 -

Series 5 decoders are capable of hosting Sound Bug add-on sound decoders.

Series 6 decoders have optimized LED and lamp lighting algorithms, have

improved scaleable speed stabilization (Back EMF), work with Digitrax Power

Xtenders to improve performance in the presence of power interruptions and

have configurable FX

pulse function on all function outputs. Sound equipped

Series 6 decoders are available with 8 or 16 bit sound.

Additional letters and numbers at the end of the decoder number indicate

the decoder’s installation interface.

Manufacturer designations are followed by a design number, 0-9, and sub-

design letter, a-z, when there is more than one version of a particular design. If

the decoder number ends after the series number, then it is a wired decoder.

TABLE I: Digitrax Decoder Part Numbers For Installation Interfaces

Designation Installation Interfaces

Blank or W Wired or Digitrax 9 pin to wires

D Digitrax 9 pin to wires

IP Integrated DCC Medium Plug

IN Integrated DCC 6 pin N-Scale Plug

P DCC Medium Plug Long 3.25” wire harness

PS DCC Medium Plug Short 1.25” (HO) or 2” (N) wire harness

S Screw terminals provided for installation

T Smaller version of regular scale size decoder-tiny

AT Athearn No Solder Harness for Blue Box Installation

(Discontinued Interface)

Designation Manufacturer Specific Interfaces:

Followed by additional designators for specific board types

K Kato board replacement

A Atlas board replacement

L LifeLike/Walthers board replacement

I InterMountain board replacement

M MicroTrains

MK Marklin board replacement

Q QSI board replacement

Z AZL board replacement

AR Aristocraft G Scale Plug