1A N-HO Scale Wired Mobile Decoder - Manual

ManualsBrandsDigitrax ManualsHobby1A N/HO Scale Wired Mobile Decoder w/8-Pin Medium Socket

Features:

▪

Function outputs for prototypical lighting eects and on/o control:

Constant Brightness Lighting with directional or independent control.

Optimized selectable LED or incandescent lamp operation

Realistic Eects like Ditch lights, Mars lights, strobes, and many more

Congurable Pulse Function available on all function outputs.

& Standard Function Qualiers operate functions based on direc-

tion, F0 on or o, direction and F0, and whether loco is moving.

Function Mapping for custom function setup.

Master Light Switch turns o all lights & functions with one keystroke.

Advanced Consist Function Controls.

▪

Digitrax LocoMotion

System-Your locomotives look like the real thing.

The Digitrax LocoMotion System makes them run like the real thing, too!

Scaleable Speed Stabilization (Back EMF) with simple setup & 256

level resolution.

Torque Compensation.

128 Speed Step operation (14 or 28 steps can also be used).

Momentum with acceleration and deceleration.

Normal Direction of Travel is user selectable.

Switching Speed feature for easier and faster access to yard speeds.

3 Step Speed Tables set start, mid and max voltage for custom control.

28 Step Speed Tables with 256 level resolution for precise control.

▪

Program CVs using any Digitrax Compatible Control system without having

to buy any extra equipment.

▪

Digitrax Easy Connect 8 Pin Harness

▪

2 Digit and 4 Digit Addressing.

▪

Basic, Advanced & UniVersal Consisting.

▪

SuperSonic motor drive for silent operation.

▪

Direct mode programming.

▪

Decoder Reset CV with or without speed table reset.

▪

Transponder Equipped ready for transponding on your Layout.

▪

Motor Isolation Protection helps prevent damage to your decoder.

▪

Automatic Analog Mode Conversion when running on DC layout.

▪

Decoder Lock for individual programming of multiple decoders in one loco.

▪

Digitrax “No Worries” Warranty.

DN136D

Fits Many N and HO Scale

Locomotives

.55” x .404” x .2”

13.9mm x 10.3mm x 5 mm

N / HO Scale

Wired Mobile Decoder

Digitrax Easy Connect 8 Pin Harness

1.0 Amp/1.5 Amps Peak

3 FX

Functions, 0.5 Amp

Complete Train Control

Run Your Trains, Not Your Track!

Summary of content (8 pages)

PAGE 1
Complete Train Control Run Your Trains, Not Your Track! DN136D Fits Many N and HO Scale Locomotives .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N / HO Scale Wired Mobile Decoder Digitrax Easy Connect 8 Pin Harness 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp Features: ▪▪ ▪▪ ▪▪ ▪▪▪▪ ▪▪▪▪ ▪▪▪▪ ▪▪▪▪ ▪▪▪▪ ▪▪ FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control.
PAGE 2
Parts List 1 DN136D Mobile Decoder 1 Instruction Sheet 1 DNWH Digitrax Easy Connect 8 Pin Harness Installation Information See the Digitrax Decoder Manual for complete decoder test procedures, installation instructions, programming and technical information. Digitrax manuals and instructions are updated periodically. Please visit www.digitrax.com for the latest versions, technical updates and additional locomotive-specific installation instructions.
PAGE 3
Installation Notes 1. 2. 3. 4. 5. 6. Do not exceed the decoder’s 500mA total function output rating. We recommend that the Blue wire, also called +Common or Lamp Common, be connected as shown. If you wish to omit the Blue wire in your installation, consult the Digitrax Decoder Manual for more information. The head lamp should be hooked up using the Blue/+Common wire for optimal Digitrax transponding operation.
PAGE 4
Digitrax LocoMotion® System Your locomotives look like the real thing, now you can make them run like the real thing, too. Digitrax decoders incorporate torque compensation for smooth as silk operation. You can also program CVs that control momentum, 3 step and 128 step speed tables, switching speed, normal direction of travel, scalable speed stabilization and more to take full advantage of the Digitrax LocoMotion System. Momentum-CV03 & CV04 Momentum is part of the LocoMotion System.
PAGE 5
Other LocoMotion® Features: Switching Speed, Normal Direction of Travel & Scalable Speed Stabilization (Back EMF) Features Switching speed is controlled by CV54. The factory setting is 000 for OFF. To turn on the switching speed feature, program CV54 to a value of 001. When this feature is on, use F6 to activate and deactivate switching speed. With the feature on the throttle’s target speed is effectively reduced by about 50% and the effects of accel and decel programmed into the decoder are reduced by 1/4.
PAGE 6
Function Outputs on the DN136D The DN136D is set up at the factory to control three function outputs. The DN136D is configured to control the forward and reverse lights on the locomotive through the white lead and yellow lead using Function 0 (F0F-forward and F0R-reverse) for directional lighting. Function F1(Green) is part of the harness for easy hookup.
PAGE 7
Warranty & Repair Digitrax gives a one year “No Worries” Warranty against manufacturing defects and accidental customer damage on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices. That’s it! A simple, straightforward warranty with no tricky language! Visit www.digitrax.com for complete warranty details and instructions for returning items for repair. Please return warranty items directly to Digitrax - DO NOT return items to place of purchase.
PAGE 8
DN136D Wire-in decoder fits Many N and HO Locomotives Super EMPIRE BUILDER Available TM TM 0 Computer Interface Decoder Programmer Sound Programmer Made in the USA Part 15, Class B RFI Compliant TM 2443 Transmitter Road Panama City, FL 32404 www.digitrax.com Contact: www.digitrax.com/contact Support: techsupport@digitrax.com Repair: repair@digitrax.