Inc Sound Module Decoder - Manual

www.digitrax.com- 54 -

9.3.1 Simple On/Off Function

All FX

decoders are set up as simple ON/OFF functions at the factory. That

means that each FX

Generator CV (49-52 & 113-116) is programmed to a

value of 00. If you have changed the CV values, you can always reprogram

them back to 00. If you do a decoder reset by programming CV08 to 08 or 09,

the FX

Generator CVs will return to their factory defaults of 00.

9.3.2 Forward Ditch Lights Operating on F2

To set up forward ditch lights to flash alternately when F0 is ON & F2 is

pressed:

1. Wire left (conductor’s side) lamp or LED to F1 and Blue Common

2. Wire right (engineer’s side) lamp or LED to F2 and Blue Common

3. Program CVs as shown below:

CV#

CV Value

CV51 106

CV52 107

CV62 196

CV63 64