Inc Sound Module Decoder - Manual
© 2017 Digitrax, Inc.
www.digitrax.com- 75 -
CV# Used For Range Default
Value
01 2 Digit Address 03
11
Sound Time Out, 06 = Sound ends when loco address is de-
selected, 00=Sound stays on after loco is de-selected
06
29
Conguration Register - Advanced or Standard speed steps, 2
or 4 digit addressing, Analog Mode, Normal direction of travel,
speed tables
06
49 Forward Light (F0F) - Headlight 00
50 Reverse Light (F0R) - Reverse Light 00
51 Function 1 00
52 Function 2 00
58 Master Volume (F8 used for Mute) 1=min 00=max 00-15 09
60 Sound Scheme Select 00-07 00
132 Notch Rate 00-255 127
133
Steam Chuff/CAM cong, 128=>EXT cam, 1-127=>DRIVER
diameter in inches
01-128 63
134 Steam Gear Ration Trim, 32 = 100% Ratio 00-255 32
135 Mute Volume 00-64 00
140 Prime Mover / Chuff Volume 00-64 60
141 Bell Volume 00-64 25
142 Horn/Whistle Volume 00-64 60
143 Time-Scattered Air Effects Volume 00-64 30
145 Misc Volume Levels 00-64 40
146 Bell Ring Rate (1=24 milliseconds) 01-100 07
147 Air Drier Rate (1= approx. 2 seconds) 01-64 02
148 Compressor Run Rate 00-255 30
149 Air Compress On Time 00-255 20
150
Horn/Whistle Setup (Default=0, Playable Horn=1, Alternate
Horn=2 +128 for playable volume.)
00-07
or 128-
135
00
151
Auto Coupler Sequence Threshold Value-Peak speed to allow
auto coupler/brake when direction change occurs and F3 is ON
00-64 48
152 Project Author ID, Digitrax=221 221
153 Project ID 168
154 Steam Blow down / Safety Volume 0-64 60
155 Notching/Slip Mode: 00=Automatic, 00
157 Bell Selector 00-03 00