User manual

VII. Under the following situation, you need to use

5V/12V Power supply

1) When connects with the 3.5 / 5.25 SATA devices

( HDD, CD ROM , DVD Rom )

2) When this product connect with 3.5 / 5.25 IDE devices

( HDD , CD Rom , DVD Rom )

3) Connecting with the 2.5 SATA HD, when the power

consumption is bigger than 1A

4) Connecting with the 1.8 / 2.5 IDE HDD, when

power consumption is bigger than 1A

* Remove the multi-function adapter

Warning: Before removing the multi-function, you must

finish the following procedure:

1) Click the icon in the [Desktop] window of your computer

2) A [Safely Remove Hardware] message window will

appear, click the [Stop] button

3) [It is now safe to remove the USB device] message will

appear, close the [Safely Remove Hardware] window

4) Turn the power switch to [OFF] position

5) Remove the 5V/12V power supply if it is applied

Note: New Hard Disk Drive must be formatted before

in use