USER’S MANUAL 3.5” Type USB 2.
Index Page Introduction…………………………………………………………………. Features &Specification…………………………………………………… Requirements……………………..….……………………………………. Package contents…………………..……………….…………………….. Hardware Installation…..….………………………………………………… Software Installation…...…………….……………….……………………… 2 2 2 3 4 7 This Product is achieve the USB 2.0 High-Speed, must be plugged in to USB 2.0 Host Port. If this product is plugged into the USB 1.1 Host port, this product will only have USB 1.1 Full-Speed.
Introduction： This is a 3.5” 1394+USB2.0 combo hard disk enclosure,it will offer an easy to carry Interface solution for user to add more storage & portable with PC. Features & Specification： 1. USB INTERFACE: ▲ Interface standard: USB Ver.2.0 /IEEE1394A ▲ USB connectors/cable: 1 USB B type female connector and 1 USB A TO B Cable ▲ Data transfer rate: USB2.0:High Speed at 480Mb/sec and Full speed at 12Mb/sec ▲Power LED : 1 LED for Power in.
Packing contents： Item 3.
Chapter 1 Hardware Installation： 1. Open the combo hard disk enclosure 2. Insert & assemble 3.
3. Please screwing HDD together with housing for two Side of HDD.
4. Assemble the top case as below 5.
Chapter 2 Software Installation： Supported OS Windows XP, Windows 2000, Windows ME, Windows 98SE (Windows XP and Windows ME&Win2000 works without driver) and Mac 10.x . The drivers supplied with this distribution are for Win98SE only. Windows XP and Windows ME and windows 2000 You do not need to install any driver if your computer’s O.S is Windows XP or Windows ME and Win2000 since the two O.S come with the supporting driver.
5. Please click ” Next” as below: 6.
7. Please select “Complete” and click “Next” 8.
9. When the drvier is install final,please click “Yes” to reatart PC. 10.
11. Windows will ask you to restart PC ,please click “yes” 12. “My computer” will appear “Removable Disk”,please format HDD and start to use it.
