USER’S MANUAL 3.5 INCH USB 2.
Index Page Features and Specification………………………………………………………….. Requirements……………………..….………………………………………………. Package Contents…………………..……………….………………………………. Hardware Installation…..….………………………………………………………… Software Installation…...…………….……………….
Features and Specification: ▲ ▲ ▲ ▲ ▲ ▲ Interface standard : USB2.0 USB connectors/cable: One USB B type connector and One USB A TO B Cable Power switch for on/off. Data transfer rate: High Speed up to 480Mbps Ideal for backup,storage Data files. Truly Plug and Play automatic system configuration . Requirements: IBM or Compatible PC / Apple iMac G4 USB 2.0 Host or USB 2.0 HUB . Windows 2000, Windows XP, Windows ME or Windows 98SE operating system /Mac OS 10.X or above Packing Contents: Item 3.
Hardware Installation: Notice:First,please set up the jump for Master type in your HDD. 3.5 inch HDD pin jump select view (1) 3.
1. Open the 3.5 inch HDD enclosure. 2. Assemble 3.5 inch HDD with power cable.
3. Assemble 3.5 inch HDD with IDE cable. 4. Screw up the HDD.
5. Please assemble HDD enclosure.
6. Screw up the case of HDD enclosure.
7. Assemble the HDD enclosure with plug.
8. Assemble HDD enclosure with base. 9. The hardware installation is completed.Please follow the software installation to continue.
Software Installation: Windows 98SE INSTALLATION 1. Please open “DriverTrayIcon” folder and double click “Setup” to continue. 2. Please select the Language to setup driver as below.
3. Please click “Next” to continue. 4. Please click “Yes” to continue.
5. System will ask you to restart PC, please click “Yes”. 6. Please click “Disk drivers” and select your Brand of HDD under “Device Manager ” in “System Properties” as below.
7. Please click “Settings” to continue as below. 8. Please click “Removable” type and click “OK”.
9. “My Computer” will appear the “Removable Disk”, please format your HDD if you use the new HDD. Win2000 /XP Installation: 1.Please click “My Computer” and click “Manage” to initial it if you use the new HDD.
1. Please click “Disk Management” and enter and click “Removable Disk” to format HDD. 2. Please select “File System” and click “OK”. 3. Please click “OK”.
4.“My Computer” will appear “Removable Disk “,you can start to use HDD enclosure now. TROUBLESHOOTING : ****Please restart your PC and reinstall application program If you run the program is fail. *****Please use the FAT32 of file system type if your O.S is Win98SE or WinME.