User manual

ManualsBrandsDigitus ManualsHDD/SSD enclosuresDA-70570-2

Seite 1



USER MANUAL

IDE to USB2.0

HDD External Enclosure 3.5

DA-70570-2



Summary of content (8 pages)

PAGE 1
USER MANUAL IDE to USB2.0 HDD External Enclosure 3.
PAGE 2
Foreword Congratulations on your purchase of our product! Before using The product, please read this manual carefully for further recognizing of the product. I. System Requirement Basic environment for setup this device: Hardware requirement: a PC, Notebook or Mac system with free USB interface; Operation system: windows98/se/me/XP,windows200,Mac os 8.6 above. II. Feature Available for 3.5" IDE HDD Compliant with USB2.0 & USB1.
PAGE 3
IV. Hardware Installation 1. Remove the screw from the back part cover 2. Slide the back part with PCB out carefully 3. Plug the side case into the HDD side mounting hole 4. Plug the 80pin ATA cable and 4pin Power cable into the appropriate port at the rear of the HDD firmly 5. Slide the HDD with the back part with PCB into the enclosure slowly and carefully, note do not loosen the power and data cable 6.
PAGE 4
Driver Setup a.
PAGE 5
VI. Power supply: Self-Power Mode Power Supply Voltage input: AC 100~240V 50/60Hz,2A Voltage output: DC 5V/12V VII. Remove a external enclosure Warning: Before removing this unit from your computer, please finish the following procedures for a safe removal: 1). Click the computer icon in the [Desktop] window of your 2). A [Safely Remove Hardware] message window will appear , click the [Stop] button 3).
PAGE 6
English With USB 2.0/1.1 connection for DIE devices, max. data rate 480Mbps supports “Hot Plug” and “Plug & Play” for Windows 98/ 98SE/ME/2000/XP/7 or MAC-OS from version 8.6 external power adaptor 100-240V AC input, 5V/12V German mit USB 2.0/1.1-Anschluss für IDE-Geräte, max. Datenrate 480Mbps unterstützt "Hot Plug" und "Plug & Play" für Windows 98/ 98SE/ME/2000/XP/7 oder MAC-OS ab Version 8.6 externes Netzteil 100-240VAC Eingang, 5V/12V Russian Русский преобразование USB2.0/1.
PAGE 7
Italy Supporta USB2.0/1.1 a IDE interfaccia, velocita' di trasferimento dati 480Mbps Supporta Hot Plug (inserire caldo), "Plug and Play" Supporta Windows 98/ 98SE/ME/2000/XP/7, Mac OS 8.6 o versioni superiori Alimentazione: Tensione di alimentazione: AC100~240V,Tensione di uscita: DC5V/2V Polish Podpiera złącze USB2.0/1.1 to IDE, szybkość przenoszenia danych 480Mbps Podpiera Hot Plug, „Plug and Play" Podpiera system powyżej Windows 98/ 98SE/ME/2000/XP/7, Mac OS 8.
PAGE 8
Windows 98/ 98SE/ME/2000/XP/7 ou MAC-OS a partir da versão 8.6 adaptador externo de corrente 100-240V AC entrada, 5V/12V Turkish IDE cihazlar için USB 2.0/1.1 bağlantısıyla, maksimum veri hızı 480Mbps, Windows 98/ 98SE/ME/2000/XP/7 ya da 8.