User manual

Seite 5

VI. Power supply: Self-Power Mode
Power Supply Voltage input: AC 100~240V
50/60Hz,2A
Voltage output: DC 5V/12V
VII. Remove a external enclosure
Warning:
Before removing this unit from your computer, please
finish the following procedures for a safe removal:
1). Click the
computer
icon in the [Desktop] window of your
2). A [Safely Remove Hardware] message window will appear , click the [Stop] button
3). [It is now safe to remove the USB device] message will appear, close the [Safely
Remove Hardware] window
4). Remove (Power off) the USB extended power jack or the 5V power adapter if it is
applied.
Now you can safely remove the enclosure!
* Format a new Hard Disk Drive
If you use a new Hard Disk Drive, you must format it before you use it.
please follow the steps as bellow to format your new Hard Disk Drive:
1). Right click [My Computer], and select [Manager]
2). System will display a "Computer Manager" window, and click [Disk Manager] in
left window
3). In right window, the message of the new Hard Disk Drive will appear under the
system disk, such as [Seagate....]
4). Right click the new disk drive, and select [Format], and select [Fast Format]-[OK]
5). You have formatted the new disk drive now, then in [My Computer], the new
Hard Disk Drive will appear and you can use it