CHARGER BOX (2x USB A, 1x USB Type-C™) User Manual DA-70618
Package Content 1x Main unit 1x User Manual Connections 1. Turn power off before installation. 2. To connect the base as shown in Diagram A before installing in into the mounting boxes, make sure there is no wire exposed at the connection. Note the phases cannot be ground trough to another safety wall outlet nearby. We recommend installing the safety outlet at the end of the row.(ATTENTION: the cross-sectional area of wire connect power is at least 1.5mm^2 not exceed 2.5mm^2） 3.
.1 FOR: 3
Important Notes DO NOT OVERLOAD. To install the product needed by a qualified electrician.
Warning For your safety, please read the following cautions before installing or using your device. • • • • • • • • • • • • • • Do not open the device or attempt to repair it. Use the device in a dry location, and avoid placing it in a humid environment. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it from the power outlet and use a damp towel. This device should only be used indoors.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.
