DUAL M.2 NVMe SSD DOCKING STATION WITH OFFLINE CLONE FUNCTION, USB-C™ Quick Installation Guide DA-71545 Rev.
Description The Dual NVMe Docking Station from DIGITUS® can accommodate M.2 SSDs of up to 4 TB per box. Manage a total of 2 SSDs in various formats with a total storage of up to 8 TB. The integrated offline clone function even makes it possible to duplicate storage media by pressing a button without a connected end device. The copying progress is displayed by LED indicators on the device. Supports M-Key and B+M Key NVMe SSDs in the common formats 2242, 2260, 2280 & 22110.
Technical Features Capacity Supported formats USB-C™ connections Maximum transfer rate USB-C™ Modes Applications Storage formats Input voltage USB-A power adapter Power supply via USB-A Systems Dimensions (W x D x H) Weight Material Color Specials Max. 4 TB per Box 2242, 2260, 2280 & 22110 / M-Key, B & M-Key SSDs (NVMe) 1 x Data USB-C™ 3.
Product Details 1) Clone button 2) M.2 NVMe SSD2 3) ON/OFF button 4) Power type C 5) Data type C 6) M.
Basic Functions • Insert NVMe SSD with vertical direction, connect USB-C cable with data type C port and PC USB port • Plug power adapter with power type C (workable with one SSD or two SSD) 5
• View “Computer-Manage-Disk Management” to find the new disk 6
• Right click the “Disk 1”, then click “New Simple Volume” • According to the instruction, choose the size of partition, then click “Next” to finish 7
• Then you can find the new hard disk in the “Computer”, it is ready to use • Connect two NVMe SSD (Source SSD capacity must be = < Target SSD) 8
• Plug power adapter with power type C • Pressing clone button for several seconds, till clone LED light 25% flash 9
• Clone LED light flash from 25%, 50%, 75% and 100% • It means that clone completed when 100% illuminate and all LEDs are off finally (Tip: when connect with PC again, make sure disconnect power type C first and follow operation as PC mode 10
Disclaimer: The product name and brand name may be registered trademark of related manufacturers.TM and ® may be omitted on the user manual. The pictures on the user manual are just for reference, and there may be some slight difference with the real products. We reserve the rights to make changes without further notice to a product or system described herein to improve reliability, function or design.
