User manual

KVM
SWITCH
 Auto skip over the power off PC.
DC OC-12
U
SER MANUAL V1.0
DC OC-12
Package Contents –
 1 DC OC-12 KVM Switch
 1 User Manual
Any thing missed, please contact with your vendor.
Features
 Controls two PCs with one PS/2 keyboard, PS/2
mouse and monitor respectively.
 Supports the standard PS/2 mouse and Microsoft
IntelliMouse.
 Supports the Window 95/98/98SE/Me/NT4.0/2000/XP,
DOS, Linux, Novell, Free BSD.
 Easily install and operate without software at all.
 Keyboard and mouse emulation for skipping over the
false boot-up.
 PC selection for Hot Key.
 Auto scan function to monitor PCs.
 Superior video quality - Up to 1920 x 1440, DDC2,
DDC2B, DDC2AB, 200MHz.
Specifications
Function DC OC-12
PC Connectors 2
Port Selection Hot Key
LEDs Selection 2
Keyboard PS/2
Emulation
Mouse PS/2
Console Port 1x6 pin mini-DIN Female (PS/2) Connector
-Keyboard
CPU Port 2x6 pin mini-DIN Male (PS/2)
Console Port 1x6 pin mini-DIN Female (PS/2) Connector
-Mouse
CPU Port 2x6 pin mini-DIN Male (PS/2)
Console Port 1x HD-15 Female Connector
-Monitor
CPU Port 2x HD-15 Male
VGA Resolution
1920x1440 (Max.), DDC2, DDC2B,
DDC2AB, 200MHz
Scan Interval 5 sec ~ 30 sec
Housing Plastic
Cable Length 1.2 meter
Weight 395 g
Dimensions (LxWxH) 90x82x24 mm
Storage Temp -20°c to 85°c
Operating Temp 0°c to 70°c
Humidity 0% to 95%
Hardware Requirements
Requirement specifications
Console
One highest resolution VGA, SVGA or Multisync monitor.
One PS/2 mouse.
One PS/2 keyboard.
PC
One VGA, SVGA or Multisync card.
One 6-pin mini-DIN (PS/2) mouse port.
One 6-pin mini-DIN (PS/2) keyboard port.
-1-
Appearance
Top View
1. Port LEDs
2. Console Port Connectors
3. CPU Port Connectors
Installation
Before the installation, making sure the peripherals are
grounded properly and turning off all PCs.
1. Connect the monitor, keyboard and mouse with the
Console Port Connectors.
2. Plug the CPU Port Connectors into the PCs.
3. Turn on the PCs.
Operation
1. LEDs Display
Activity Meaning
Off PC power off.
Green On PC power on and connected.
Green On, Red Flashing
PC power on and connected and
selected.
Note: If LEDs red light still going on flashing after
turning off the PCs, clearing state by turning
on any one of the PCs.
2. PC selection
Hot Key Navigation allows you to select PC directly
from keyboard.
-2-