User manual

Upgrade

Upgrade allows the user to upgrade the print server device. In order to upgrade the unit

please perform the steps as follows:

1. Click Upgrade button just like a picture ＜＞, as shown as follow picture

2. Select General Upgrade. Make sure that the upgrade file is located in the same

directory as PSAdmin.

Reset

1. Click Reset button just like a picture ＜＞.

2. Reset allows the user to reset the print server device in order to establish a new

connection or for new settings to take effect.

Refresh

1. Click Reset button just like a picture ＜＞.

2. Refresh searches the network for all attached print server(s).

Note: Configure the print speed in the Advanced label, must match the printer’s speed

which connect to the print server. Undependable configuration will cause printer to

abnormal printing.