User manual

4.Port Name:
In this option, type a name for identification purpose or just leave it in default
(recommended).
Note: The default print server’s Chooser name is as shown as follows:
<ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the device’s
Node ID. For example: ATALK_PS-40EEED-1. You may also change the <ATALK_PS> to
a name you like for identification purpose in this option. The print server will append the last
six digits to the name you specify.
5. Type:
In this option, the LaserWriter of printer type by default (recommended).
6.Binary Protocol:
In this option, data format includes ASCII, TBCP and BCP.
Setting Up a Macintosh Computer
1. At a Macintosh computer, from the Apple menu, select Chooser.
2. The Chooser window then displays an Apple Zone list. Select the Zone name that you
specified when configuring the PRINT SERVER.
Note: If you select a Zone that the PRINT SERVER doesn’t belong to, as you specified in the
previous section, no print server will be displayed in the Step 4.
3. You have to use a PostScript printer that you can select the LaserWriter 8 icon.
4. The Chooser window then displays PRINT SERVER (s) featuring the support for
AppleTalk protocol, along with its default Chooser Name in the right-hand Select A
PostScript Printer dialog box.
Note: 1.You may change the default Chooser name and Zone name of a PRINT SERVER by
using your web browser before proceeding with this installation. Please see the
previous section in this chapter for details.
2. If you use Mac OS 8.x or 9.x, please make sure your printer support PostScript.
5. Click Setup… button and choose the PPD file matching your printer, and click OK. If
your printer does not appear in the PPD file list, please contact your printer vendor.
You may also use the Generic PPD if you do not need any printer specific features.
6. Close the Chooser Windows.
7. Done.