Manualshelf

User manual

ManualsBrandsDIGITUS ManualsNetwork ComponentsNetwork print server USB 2.0, LAN (10/100 Mbps)
41424344454647484950
6. Network Print Monitor
Preparation
The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows
computer. Please make sure that the following steps have been completed before
proceeding with installation under Windows 95/98/ME/NT4/2000/XP 32bit edition/server
2003 32bit edition.
Select A Desired Protocol
TCP/IP
The TCP/IP Protocol must be installed. For further information, please read “TCP/IP
Protocol Installation” section in this chapter.
Note: If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print
server” section later in this chapter.
IPX/SPX
The IPX/SPX-compatible Protocol must be installed. For further information, please read
“IPX/SPX-compatible Protocol Installation” section in this chapter.
NetBEUI
The NetBEUI protocol must be installed. For further information, please read “NetBEUI
Protocol Installation” section in this chapter. The Windows XP/2003/Vista/7 does not support
the NetBEUI printing.