User manual

Reset Button

Reboot the Print server:

1. Verify the power of print server is turned on.

2. Press the reset button once, and then release it.

WARNING: This will restart the print server and stop all on-going and pending print

jobs!

Perform a Factory Default:

1. Disconnect the external power adapter.

2. Hold down the reset button.

3. Reconnect the external reset button. Wait about 5~6 seconds.

4. Release the reset button.

5. The print server will restart.

WARNING: This will erase all settings of print server to default and should be

performed with caution!

Print Self-test Page:

1. Verify the power of print server is turned on.

2. Press the reset button for 5 seconds, and then release it.

3. Then the self-test page including the factory default settings will be printed.

Note:

1. It is strongly recommended to use Laser Printer for self-test page printing.

2. Some printers are not supposed to print the self-test page completely. For example, the

HP deskjet 948c/895CXi will print the self-test page, but its paper-out LED will light up.