Datasheet

110
8.4.2 Wireless
If you want to use the print server through wireless
LAN, please set up the print server through Ethernet
first and make sure your wireless LAN setting is
correct. After setting the wireless LAN, unplug the
Ethernet cable and restart the print server, then you
can start to use the print server through wireless LAN.
If the wireless configuration does not work, please
plug the Ethernet cable again, restart the print server
and configure the print server through Ethernet until
the wireless LAN settings are correct.
8.4.2.1 General Setting
You can enable/disable the wireless function and
set parameters that are used for the wireless stations
to connect to this print server from here. The
parameters include “Function”, “Mode”, “ESSID” and