Datasheet

111
“Channel Number”. You can manually set the
parameters of wireless LAN in this page or use the
“Site Survey” function to automatically search for an
available access point and associate with it.
Function is for user to disable, enable or let the
print server auto select to connect to the wired or
wireless network. If “Disable” is selected, the print
server can only connect to the network through wired
Ethernet. If “Enable” is selected, the print server can
only connect to the network through Wireless LAN. If
“Auto” is selected, the print server can automatically
decide to enable or disable the wireless function. The
print server only can work in ether Ethernet or wireless
LAN mode. It cannot work in both Ethernet and
wireless LAN mode at the same time. When the print
server starts up, it will auto-detect if the LAN port is
connected to an active network by an Ethernet cable. If
the print server is connected to an active network by
Ethernet cable when starting up, the print server will
run in Ethernet mode. If the print server is not
connected to an active network by Ethernet cable
when starting up, the print server will run in wireless
LAN mode. The print server default is in “Auto” mode.
Mode is the operation mode of wireless station.
You can choose ether “Ad Hoc” or “Infrastructure”
mode. If you do not have any access point and want to
use peer-to-peer connection, you have to choose “Ad
Hoc” mode. If you have an access point as the
wireless LAN infrastructure, you have to choose
“Infrastructure” mode.