Datasheet

118
Settings Automatically (Use DHCP/ BOOTP)”. You also
can select “Disable Use the following TCP/IP Settings”
to manually assign “IP Address”, “Subnet Mask” and
“Gateway” for the print server.
You can enable/disable or set auto for the print
server’s DHCP server. The DHCP server is disabled by
default. If the DHCP Server is enabled or set Auto, you
have to assign a range of IP addresses here. Fill in the
“Start IP”, “Range”, “DNS”, “Subnet Mask” and
“Gateway”, and the print server will assign a unique IP
for each client. Note that when “Auto” is selected, the
DHCP Server of the print server will be enabled only
when there is no other DHCP Server within the
network.
8.4.4 SMB