Datasheet

119
You can enable/disable the SMB protocol from
here. If SMB is enabled, enter the “SMB Group Name”
to specify the SMB group that this print server belongs
to. All PC should join the same group before they can
use this print server by SMB protocol.
“Pass Job When Error Occurred” is for you to set
the interval time for bypassing the current printing job
in order to avoid the printing job is not printed
completely while the printer is interrupted
unexpectedly because of paper out or off line.
8.4.5 SNMP
The print server supports SNMP configuration. If it
is enabled, please set up the following parameters.