Datasheet

138
Safety Information:
This device may only be operated in enclosed, dry rooms. To prevent the risk of
fire or electrical shock, the device must be protected from moisture. In the event
of a defective power plug, please contact an authorized retailer. In the event of
damage to the housing or the power plug, do not operate. Do not open the
device. Repairs may only be performed by an authorized retailer.
Note:
In the event of incorrect installation and improper use in a residential area, the
device may cause disruptions in radio devices and other electronic devices.
Proper use means that the device is operated with shielded connector cables as
far as possible, for network products also with shielded cables of category 5e and
higher. The device was tested and lies within the limits for computer accessories
of class A according to the requirements of EN 55022.
Warning:
This is a class A device. This device can cause radio interference in residential
areas; in this case, the operator may be required to perform and bear the costs
for appropriate measures.
Conformity Declaration:
The device fulfils the EMC requirements of EN 55022 class A for ITE and EN
55024. Devices with external or built-in power supply also fulfil the requirements
of EN 61000-3-2 and EN 61000-3-3. The basic protection requirements of the
“EMC Directive” 89/336/EEC are therefore fulfilled. The CE conformity has been
certified. The corresponding declarations are available from the manufacturer.
Trademarks:
All company, brand and product names used in these instructions are trademarks
or registered marks of the corresponding companies.