Datasheet

15
2. Hardware Installation
1. Unpack the print server package and verify that
all the items listed in the section 1.2 are provided.
2. Connect the print server to the printer you want
to share on the network.
3. Connect the print server to your network by
attached the network cable to the UTP port of the print
server.
4. Connect the power adapter to the print server.
The print server will perform the Power-On-Self-Test
(POST) after it is powered on. During the POST, the
Status and Ready LEDs will be on. When the LEDs are
unlighted, the print server is ready.
NOTE1: MUST use the power adapter shipped with the print
server, do NOT use any other power adapter from any
sources.
NOTE2: To prevent the compatibility problem between print
server and a few printer, it is recommended that you
power on the print server before the printer.