Datasheet

56
6.1 Introduction
The print server is available for TCP/IP printing by
Unix LPD (Line Printer Daemon) protocol. The LPD
protocol originated with Unix release is based on the
BSD version of Unix and supported under most
versions of Unix.
This chapter explains how to configure the print
server for TCP/IP operation, and how to modify
configuration files on your Unix system to allow
printing to the print server. The configuration examples
in this manual follow the syntax for BSD based Unix
systems. Please refer to the related system
documentation for the correct syntax of your systems.
To configure the print server for LPD printing,
perform the procedures below:
1. Enable Print Server’s TCP/IP Support.
2. Set up Print Server’s IP address.
3. Verify Print Server’s IP Address.
4. Configure remote LPD printing on the host.
5. Print a test page.
In the next sections, we will describe these five
procedures step by step.