Datasheet

Click the “IP” button to enter the IP setting page. If

you need the print server to automatically get an IP

from DHCP server, select “Auto IP”. You also can

select “Static IP” to manually assign “IP Address”,

“Subnet Mask” and “Gateway” for the print server.

Click the “DHCP Server” button to enter the DHCP

server’s setting page. You can “Enable/Disable” the

DHCP server or set “Auto” and assign a range of IP

addresses here. The DHCP server is disabled by

default. If Auto is selected, the DHCP Server of print

server will be enabled only when there is no other

DHCP Server within the network. When “Enable” or

“Auto” is selected, you have to configure “Starting

Address”, “Range”, “Subnet Mask”, “Gateway” and

“DNS”. The print server will assign a unique IP for

each client.