Datasheet

86
In the Ad-Hoc mode, you can let the print server
automatically associate with other wireless station or
manually assign the SSID of your wireless network.
You can let the print server automatically select the
channel that is the same with the peer or manually
assign a channel.
If you select to let the print server scan for an
active wireless station, the following window will pop
up.
The list is the scanned active wireless stations.
Select a wireless station in the list and click “Next”. If
you cannot find the wireless station that you want the
print server to communicate with, click “Scan” to let
the print server scan again.
Both “Infrastructure” and “Ad-Hoc” mode have to
go through the following procedure: