Datasheet

8. Click Submit to save your settings. And the server will reboot.

9. You have now finished the procedure of setting the wireless parameters.

# In infrastructure mode, DN-13015 searches all channels to join the matched wireless

service set. In ad-hoc mode, DN-13015 searches all channels to join the matched wireless

ad-hoc service set too, however, if none are found, DN-13015 creates that service set in the

assigned channel.

# In ad-hoc mode, WPA-PSK/TKIP is not allowed.

After properly configuring the wireless parameters, you can remove the network

cable and reboot the

DN-13015. DN-13015 will then connect to your wireless network.

DN-13015 will detect if a network cable is plugged-in or not. If a network cable is

plugged-in,

DN-13015 will always connect to the network through the network cable.

Otherwise it will always connect to the network through wireless module. Once

DN-13015 connects to the network, either by network cable or by wireless module,

all operations of print / scan / file server are exactly the same.

3.3 Assigning an IP Address to the Server

3.3.1 Preliminary

 If you have a DHCP server on your network, your Server will receive an IP