Instructions

7.2 Using Init Button

Plug in the power adaptor while pressing the Init button until LED indicators of USB1 and USB2

blink. After that, plug off the power adaptor and then plug in the power adapter again to restart

the Server. Finally, the Server will operate using the Factory Default values.

7.3 Default Parameters List

TCP/IP

 Automatically get IP by DHCP: Enabled

 Static IP: Disabled

- IP Address: 192.168.1.100

- Subnet Mask: 255.255.255.0

User Accounts

 Administrator: admin

 Password: admin

Chapter 8 Upgrade Firmware

This chapter describes how to upgrade firmware. Please follow one of the following Procedures:

Procedure A: Using the Control Center

1. Open Control Center. It will automatically search the existing Servers and display their

statuses.

2. Select the Server that you want to upgrade the firmware. Double click the selected

Server to get the serve’s main web page.

3. Click CONFIG icon.

4. Login the Server with Administrator (default: admin) and Password (default: admin).

5. Click Maintenance.

6. Click Upgrade Firmware.