Instructions

6. Indicators

Power Indicator is lit while power is applied. If it is not lit, or if it
blinks, there is a problem with the USB device server or Power
Adapter.
 LAN Indicator blinks to indicate wired network activity. If it is lit, it
indicates the wired network is applied. If it is not lit, it indicates that
the server does not connect to the wired network.
 WLAN Indicator blinks to indicate wireless network activity. If it is lit,
it indicates the wireless network is applied. If it is not lit, it indicates
that the server does not connect to the wireless network.
 USB Indicator(s) is lit while a USB device connects to a USB Port of
the USB device server. If it is not lit, or if it blinks, there is a problem
with the USB device or the USB device server.
 Connect Multifunction USB Network Server to Your Wired
Network
I. Connect Server to the wired network, such as a LAN switch or a LAN
hub, using a LAN cable.
II. Connect USB printers, hard drives or flash ROM disks, or all-in-one
series printers (AIO/MFP), or USB speaker, or USB 1.1 camera to the
server using USB cables.
III. Plug in the power adaptor (included in this package) to power on the
device.
 Connect Multifunction USB Network Server to Your
Wireless Network
I. Follow Step 5.
II. Properly set up wireless configuration as Step 8.
III. Plug-off the LAN (Ethernet) cable.
IV. Plug-off the power adapter and then plug-in the power adapter to
restart server. The server will connect to your wireless network.