Instructions

Then just use the new disk as a general disk. After you finish the disk
operations, click the storage icon in the system tray and choose “Safely
remove USB Mass Storage Device” to remove the USB storage, as
Fig9.
Figure 9 Removing the USB Storage
Then, in the Control Center, click the USB storage device and click the
“Disconnect” button to disconnect the USB storage device.
 Default Parameters
Some of the important default parameters are shown below.
- Administrator: admin
- Password: admin
- Server Name: DIGITUS
- Workgroup: WORKGROUP
- Static IP: 192.168.1.100
- DHCP: enabled
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the
requirements of Directive 2014/53/EU and the Directive 2011/65/EU for RoHS compliance.
The complete declaration of conformity can be requested by post under the below mentioned
manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living
environment. In this case, the user can be requested to undertake appropriate measures to
prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany