User manual

Plug&View IP camera ׀ Manual ׀ ML-201310 10
5.3.4 PTZ
Enable or disable the flip and mirror of the cameras image, depending on the mounting of the camera.
Set the speed of the pan and tilt, adjust the stay time between 2 and 60 seconds and choose the
patrols between 2 and 10 times. If the default position is enabled, the camera will automatically move
back to the set position after the end of the set time.
5.3.5 Network IP Settings
Here you assign a fixed IP address to the camera, according to the configuration of your LAN or
WLAN, or select DHCP if you are using a DHCP-server, such as your router, for the assigning of IP-
addresses. The ports for HTTP, RTSP and ONVIF can be modified here, if port forwarding settings
are required on your router.
5.3.6 DDNS