User manual

Plug&View IP camera ׀ Manual ׀ ML-201310 11
If you want to have additional access to the user interface via a DynDNS provider, activate Dynamic
DNS by selecting "on" and enter your domain and access data.
5.3.7 E-Mail
You can configure your E-Mail Settings here. You can choose if you want to use the default pre
configured e-mail server, or want to use your own server. If you want to use your own server, start
with the SMTP server you are using. Enter the IP address or host name of the SMTP server. If you
don´t know the SMTP server settings, please refer to the settings you are using in your e-mail
software or ask your network administrator or ISP.
Enter the SMTP server port your SMTP server is using and enable SSL if necessary. If your SMTP
server is using authentication, please active this as well by authenticating with your username and
password.
Please enter the mail addresses where the e-mails should be send to. You can enter up to 3 different
e-mail addresses.
From as is used as sender e-mail address. Some mail servers reject e-mails from unknown senders.
In this case, please enter your own e-mail address here.