User manual

10 Plug&View IP camera ׀ QIG Rev. 2-0 ׀ ML-201405
In the same way confirm in a possible message of the Windows
Firewall, that Java is allowed to communicate with the Internet. For
the multimedia and control functions, the OCX component needs to
be installed in Internet Explorer and the VLC Media Player in Firefox
and Chrome. A corresponding download link will be displayed in the
user interface if necessary.
The MAC-address and the activation code are located on the last
page of this guide. Enter both in the appropriate fields and click on
"Apply".
After successfully adding the camera to the camera list, please
check whether your camera is displayed with a small preview
image.
If you plan to continue using your Plug&View camera with a
network cable, the setup is completed here.
If, however, you intend to use the wireless variant in the WLAN for the
greatest possible flexibility in the choice of location, please continue
read reading.
4. Setting up WLAN
The setup of the wireless (WLAN)connection between the IP
camera and the WLAN-Router/ Accesspoint is done on the PC via
the browser
After the successful installation of your camera, log in to the web
site "http://www.plug-view.com". Please click on "Login | My camera
administration".
Use your Plug&View user name or select the Google-Login. If you
are not signed in to your Google account, you will be automatically
redirected to the Google login page.