User manual

18
Adding the camera by scanning the QR-Codes
On the next page, select the
option "Scan QR code".
The QR code scan function of
your mobile device is activated.
Please scan the QR code on the last page of this manual to add
the camera into your account.
During QR code scanning, you may need to move your mobile
device backwards and forwards until the code is recognized.
Adding the camera though manual input of MAC-
address and activation code
The MAC-address and the activation code are located on the last
page of this guide. Navigate to "Manual input" after selecting "Add
camera" in the Plug&View app.
Enter the alphanumeric combination, which you find under "MAC".
Then enter your activation code and click "Apply".