User manual

Camera Connections

DIGITUS

outdoor Plug&View cameras are equipped with a special

cable.

Check installation option by means of the installation illustration.

 Reset button:

Press and hold this

button for 10 seconds

after the camera is

connected and ready-

to-use. This resets the

camera to default

settings.

 Network cable:

Connect the network

cable to you router on

the network to establish

Internet connection.

 DC 12V power

connection:

Connect the external

power adapter to

supply the camera with

power.

 LED status indicator:

The blue LED status

indicator shows if the

camera is supplied with

power.

For DN-16039, DN-16043 and DN-16048, its power can be supplied

directly to the camera via the network cable in connection with a

PoE injector or PoE switch.